SMC Networks SMC Barricade g SMC2804WBR User Manual

ADVANCED SETUP
69
DoS Detect Criteria
Set up DoS (Denial-of-Service) and port scan criteria in the
spaces provided (as shown below).
Parameter Defaults Description
Total incomplete TCP/UDP
sessions HIGH
300 sessions Defines the rate of newly
unestablished sessions that will
cause the software to start
deleting half-open sessions.
Total incomplete TCP/UDP
sessions LOW
250 sessions Defines the rate of newly
unestablished sessions that will
cause the software to stop
deleting half-open sessions.
Incomplete TCP/UDP sessions
(per min.) HIGH
250 sessions Maximum number of allowed
incomplete TCP/UDP sessions
per minute.
Incomplete TCP/UDP sessions
(per min.) LOW
200 sessions Minimum number of allowed
incomplete TCP/UDP sessions
per minute. Set this to “0” if no
minimum setting is required.
Maximum incomplete TCP/UDP
sessions number from same
host
10 sessions Maximum number of incomplete
TCP/UDP sessions from the
same host.
Incomplete TCP/UDP sessions
detect sensitive time period
300 msec Length of time before an
incomplete TCP/UDP session is
detected as incomplete.
Maximum half-open
fragmentation packet number
from same host
30 Maximum number of half-open
fragmentation packets from the
same host.
Half-open fragmentation detect
sensitive time period
1 sec Length of time before a half-open
fragmentation session is
detected as half-open.
Flooding cracker block time 300 sec Length of time from detecting a
flood attack to blocking of the
attack.

SMC Networks SMC Barricade g SMC2804WBR Specifications

General

Brand	SMC Networks
Model	SMC Barricade g SMC2804WBR
Category	Wireless Router
Language	English