Configuring the Wireless Barricade g Router
74
Firmware Upgrade
Use this screen to update the firmware or user interface to the
latest versions. Download the upgrade file from the SMC web
site (www.smc.com) and save it to your hard drive. In the
Upgrade Target field, choose Firmware. Then click Browse to
look for the previously downloaded file. Click BEGIN UPGRADE.
Click OK to continue with the upgrade process. Note that the
Barricade may become unresponsive for as long as one minute
after the firmware upgrade. This is normal behavior. Do not
restart the device. Check the Status page, Information section to
confirm that the upgrade process was successful.
To Next Page
Loading...
