S
ETTING
U
P
TCP/IP
TO
W
ORK
WITH
THE
W
IRELESS
B
ARRICADE
5-34
Step 3. Obtain IP Settings From Your Wireless Barricade
Now that you have configured your computer to connect to your Wireless
Barricade, it needs to obtain new network settings. By releasing old IP
settings and renewing them with settings from the Wireless Barricade, you
will also verify that you have configured your computer correctly.
1. On the Windows
desktop, click “Start/
Programs/Command
Prompt.”
2. In the “Command
Prompt” window, type
“IPCONFIG /
RELEASE” and press
the <ENTER> key.
To Next Page
Loading...
