Configuring the Gateway’s mso Interface
175
SMCD3GNV Wireless Cable Modem Gateway User Manual
Testing Connectivity to Destination and IP Addresses
There may be times when you encounter a problem trying to reach a certain destination. If
you examine the Gateway’s configuration and operation and everything looks fine, the
problem might be with a router up the line from the Gateway or with the line itself.
To help you identify such issues, the Network Diagnostic Tools menu lets you test
connectivity to a destination or IP address. To display the Network Diagnostic Tools menu,
click Troubleshooting > Diagnostic Tools in the menu bar. Figure 102 shows an example
of the menu.
Figure 102. Example of the Network Diagnostic Tools Menu
To Next Page
Loading...
