Configuring the Gateway
81
SMCD3GNV Wireless Cable Modem Gateway User Manual
Table 18. Add Blocked Device Menu
Option Description
Auto-Learned Devices To select a device that the Gateway automatically learned, select the device under Auto-
Learned Devices.
Custom Device To select a custom device, enter the name and MAC address of the device in the Computer
Name and MAC Address fields below Custom Device.
Always Block? Select whether you want the Gateway to always block this device. Choices are
• No = the Gateway does not always block this device. Use the Set Block Time and Set
Blocked Days to instruct the Gateway when to block this device.
• Yes = the Gateway always blocks this device until you remove the block. (default)
Set Block Time
Start from If you selected No for Always Block?, select the time when the Gateway is to start blocking
this device.
End on If you selected No for Always Block?, select the time when the Gateway is to stop blocking
this device.
Set Blocked Days
Select All Click this link to select all seven days. This link is not available if you selected Yes for Always
Block?
Select None Click this link to deselect all seven days. This link is not available if you selected Yes for
Always Block?
Monday – Sunday Check the check boxes that correspond to the days when you want the Gateway to block this
device. These checkboxes are not available if you selected Yes for Always Block?
SAVE button Click this button to save your settings.
CANCEL button Click this button to discard your settings on the Add Blocked Device menu.
To Next Page
Loading...
Need help?
General
