Using the SMC WLAN Configuration Tool (Windows)
39
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
4. Click OK. The name of the profile and its SSID appear on the left side of the screen.
5. To define more new profiles, repeat steps 1 through 4.
6. To select a profile, click it on the left side of the screen and click Connect.
Modifying a Profile
There may be times when you need to edit a profile’s settings. To modify a profile:
1. On the left side of the Profile screen, click the profile you want to modify and click Modify.
The Site Config dialog box appears, with the settings for the selected profile.
2. Complete the fields in the Site Status and Security Setting tabs. For more information,
see “Adding a New Profile” on page 38.
3. Click OK.
Deleting a Profile
If you no longer need a profile, you can delete it from the Profile screen. To delete a profile:
1. On the left side of the Profile screen, click the profile you want to delete.
2. Click Delete. The profile is deleted from the left side of Profile screen.
Note: A precautionary message does not appear before you delete a profile. Therefore, be
sure you no longer need a profile before you delete it.
To Next Page
Need help?
General
