SMC Networks SMCWUSB-N4 User Manual

Using the SMC Wireless Utility (Mac)
65
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
Disconnect Button
Use this button to stop WPS action and disconnect the active link. You can then select
another profile from the Profile tab if one exists. If there are none, the Adapter selects any
non-security access point.
Export Button
Use this button to export the selected profile in the WPS Profile List to the Profile tab.
PIN Button
Use the PIN button at the bottom of the tab to start to add to the Registrar using the PIN
configuration method. Enter a PIN in the Pin Code field or read a PIN from your Enrollee
before clicking this button.
Note: After you click the PIN button, wait two minutes before clicking Rescan to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click Disconnect to stop the
WPS connection.
PBC
Use the PBC button to add access points using the PBC configuration method.
Note: After you click the PBC button, wait two minutes before clicking Rescan to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click Disconnect to stop the
WPS connection.
WPS associate IE Check Box
Check WPS associate IE to send an association request with WPS IE during WPS setup.
This is optional for STA.
WPS probe IE Check Box
Check the WPS probe IE check box to send a probe request with WPS IE during WPS
setup. This is optional for STA.

SMC Networks SMCWUSB-N4 Specifications

General

Brand	SMC Networks
Model	SMCWUSB-N4
Category	Adapter
Language	English