Using the SMC WLAN Configuration Tool (Windows)
43
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
Configuring SSID, Wireless Mode, and Channel
Mode: AP mode
Tab: Basic Setting
Using the Basic Setting tab, you can configure the Adapter’s SSID, wireless mode, and
channel.
Name of the wireless network scanned by the Adapter.
Select a wireless frequency (for example, 2.4G).
Select a radio channel used by the Adapter to transmit data. Changing the channel is only effective
in ad hoc – peer-to-peer networks. Networks that operate in Infrastructure mode automatically scan
for a channel. Table 3-2 shows the operational channel frequency for several countries.
Click this button to apply your settings.
The Basic Setting tab also provides a Restore Default button for returning the Adapter to
its factory default settings.
Note: A precautionary message does not appear before you return the Adapter to default
settings.
To Next Page
Loading...
Need help?
General
