SMC Networks ZSE40A(F)

-29-
No.PS※※-OMM0007-H
Press the button to set. Move on to setting of display colour.
Press the button to set. Return to function selection mode.
Setting of [F 1] operation of OUT1 completed
1: The selected parameter becomes effective after pressing the button.
2: After setting, it is possible to move to measurement mode by pressing the button for 2 seconds or longer.
3: Select the OFF mode if OUT1 is turned OFF.
Setting of Hysteresis
Press the
or
button to
select hysteresis.
Setting of display colour
Press the
or
button to select display colour.