SME AC-M1 - General Technical Specifications

2.2 General Technical Specifications
AC-M1 has the following remarkable features:
✔ Low R
DS,on
MOSFET
✔ 16 bits DSP controlling 1 AC motor
✔ High Speed FLASH Memory
✔ Switching Frequency: 9kHz
✔ Integrated Hall Effect Current Sensors
✔ Communication: RS232, LIN and CAN-Bus
✔ Available Supply Voltages (Volts): 24,36,48,72,80
✔ Maximum Current, measured in a two-minute time interval.
○ 24V version: 350-450-600 A
rms
○ 36/48V version: 375-500 A
rms
○ 80V version: 350-450 A
rms
✔ Working temperature range: -30°C/+40°C
✔ Maximum heat sink temperature: 100°C
✔ Mechanical Characteristics:
○ Dimensions: 210x145x91 mm
○ Connectors: 2x23 Ampseal terminals
○ Environmental Protection: IP65
○ Available with Aluminum baseplate or finned Heatsink
✔ I/O specifications:
○ N° 21 Digital Inputs
○ N° 8 Analogue Inputs
○ N° 5 Outputs
PRELIMINARY VERSION 7