52
Instructions for the user
7.8 Secondary menu
This product also has a “secondary menu” that allows the user to:
1 (P1: OF / ON) Activate or deactivate the commands locking function
( ); once the function is set to
ON it will be activated 2 minutes after
the last use of the commands by the user, blocking all the functions of
the knobs. Activation of command blocking is identified by the
appearance of the symbol on DSP. To temporarily deactivate locking
and modify a cooking programme or select a different function, keep
PT1 pressed down until the ( ) symbol disappears from DSP. At this
point you can make the desired changes, and 2 minutes after the last
setting, locking will be reactivated. To permanently deactivate locking
you have to enter the secondary menu and deactivate it as described in
this paragraph.
2 (P2: OF / ON) Activate or deactivate the Show Room function; this
function disables all the heating elements so that only the control panel
works (To use the oven normally, set P2:OFF).
3 (P3: HI / LO) Activate or deactivate the function that allows electrical
consumption to be reduced to 2300 W.
When the child safety device is activated (P1:ON), if a knob is moved
“bLOC” is displayed on DSP for 2 seconds. An action on PT2 also activates
the “BLOC” alarm until the function originally selected is restored.
To Next Page
Loading...
Need help?
General
