30
12.1 Cleaning the filter during the day
In case of particularly heavy-duty working conditions, the filter should be cleaned every 30-40
cycles, keeping the machine in operating conditions; to do this, carry out the “partial tank pump-
out” routine (program “P0”)) (TANK UNL).
Press the button, and hold it down, until “TANK
UNL” and the duration of 2’ appear on the display.
Confirm by pressing ; light L2 turns blue.
At the end of the pump-out the word “END” flashes on
the display. The display returns to showing “P1”. Clean
the filter in accordance with the instructions.
After cleaning the filter:
for "undercounter" models, press to start filling (FILL).
for hood-type models, filling (FILL) starts automatically when the hood is closed.
12.2 Total pump-out at the end of the day
The dishwasher is able to perform an automatic cleaning cycle at the end of the day.
Press the pump-out button and the display shows
“UNL” and the duration.
Confirm by pressing , light L2 turns blue.
When pump-out is complete the appliance switches off.
Never switch the dishwasher off with water in the tank; always pump out first.
To Next Page
Loading...
