Smeg HTY511DSUK - Troubleshooting Stained Glasses and Cutlery; Troubleshooting Water Left in Tank After Pump-Out

33
STAINED GLASSES AND CUTLERY
Rinse aid unsuitable or not being
delivered correctly.
Water hardness above 12°dF or
large amounts of dissolved salts
Check container of rinse aid and
whether type is suitable for the mains
water- If the problem persists, contact
the after-sales service.
WATER LEFT IN THE TANK AFTER
PUMP-OUT.
Waste tube badly positioned or
partially clogged.
Verify that the tube and drainage are
not clogged and that the drainage is
not positioned too high; see connection
scheme.