10
Instructions for the installer
4.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures 1
and 2.
Fasten using the 4 screws at the
corners “C” of the oven door frame,
after having removed the side panels
fastened by screws “A” and by
supports “B” as shown in figure 3. To
refit the side panels, ensure the pins
inside them are correctly fitted into the
supports “B”, then tighten the screws
“A”.
3.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.
To Next Page
Loading...
Need help?
General
