Instructions for the installer
121
Removing the internal glass pane:
• Remove the internal glass pane by pulling
it upwards, following the movement
indicated by the arrows. Doing this
detaches the 4 pins attached to the glass
from their slots in the oven door.
Removing the middle glass panes:
(pyrolytic models)
• There are two middle glass panes in
pyrolytic models, attached using 4 small
locks. Remove the middle panes by lifting
them upwards.
(Multifunction models)
• Multifunction models have a single
intermediate pane. Remove the
intermediate pane by lifting it upwards.
Cleaning:
• Now it is possible to clean the external
glass pane and the panes removed
previously. Use absorbent kitchen roll. In
the case of stubborn dirt, wash with a
damp sponge and neutral detergent.
Replacing the glass:
• Replace the panes in the reverse of the
order in which they were removed.
• Reposition the internal glass pane, taking
care to centre and insert the 4 pins
attached to the glass into their slots in the
oven door by applying slight pressure.
To Next Page
Loading...
