36
Instructions for the user
5.8.2 End of set time
At the end of the previously set time, the hob will warn the user with a series of buzzers. Press any key
to stop the buzzer.
5.8.3 Deactivating the timer
To deactivate the timer during the countdown, zero the set time using key . When the display shows
the timer has been deactivated.
5.9 Cooking zone automatic switch-off timer
This function is used to program the automatic switch-off of each cooking zone at the end of a period of
time (from 1 to 99 minutes).
5.9.1 Setting the cooking time
If the cooking zone is not selected, press keys and at the same time, will appear on
the display. (See “5.8 Timer").
Press keys and again, if at least one cooking zone is enabled, one flashing dot will light to
indicate that the zone is being timed. It is now possible to select the automatic switch-off time using keys
and (hold the keys down to set the time more quickly), or select an additional hot plate using
keys and .
If the timer is activated with no cooking zone active, it will behave as described previously, see “5.8
Timer”.
5.9.2 Changing the set time
Press keys and at the same time until a lighted dot appears under the display of the zone
whose set time is to be changed. Once the relevant zone is selected, use keys and to change
the previously selected time.
5.9.3 End of set time
At the end of the previously set time, the hob will deactivate the cooking zone and warn the user with a
series of buzzers. Press any key to stop the buzzer.
To Next Page
Loading...
