37
Instructions for the user
5.10 Control lock
The control lock is a device that protects the appliance from accidental or inappropriate use.
This function cannot be enabled if the cooking zones are active.
5.10.1Activating the control lock
After having switched on the hob (see “5.3 Switching on and off the hob”), press keys and at
the same time. After the buzzer has sounded press key .
The controls are now locked and will appear on the display.
In case of a power failure the control lock will be disabled.
5.10.2Deactivating the control lock
Press keys and at the same time. After the buzzer has sounded press key .
5.11 Power management
To optimise energy consumption, the groups made up of two hot plates
(see figure below) are prevented from supplying more than a determined
maximum operating power. If the value set for the two hot plates exceeds
the permitted power, the electronic circuit board will automatically maintain
the maximum level permitted modifying the power supplied by the hot
plates. The power level selected by the electronic circuit board will always
be visible on the display.
Priority is given to the last zone set.
For power management reasons, if the front left hot plate has been switched on it will not be possible to
switch on the rear right hot plate as well or vice versa.
To Next Page
Loading...
