Chapter 4 - Preparing the machine for use
30
4.3 ADJUSTING THE PACKAGING PLANE
The product carrier motor-driven belt 1 must be adjusted using the handwheel 2 according to
the height of the product to be packaged.
For a good packaging, film sealing 3 must take place at half the product height 4.
4.4 ADJUSTING THE SEALING FRAME
To adjust the opening width of the sealing frame, only on model FP560, move clip 1 along its
guide.
Adjust the opening force of the sealing frame by turning screw 2 clockwise to increase it or anti-
clockwise to decrease it.
To Next Page
Loading...
