· 1. Deep-depress CORRECT.
2. Hold down to delete incorrect characters.
Now is the time for all g
3. Type the new characters in the spaces-where the wrong chorocrers hove
been deleted .
To remove and correct only one character on rhe current line :
On Friday, Mr. Harru Jones,
1. 13ockspoce or space to the incorrect char octer "u".
2. Dee13-depress CORRECT with a quick strol~e.
3. Type correct character "y''.
Note: If a new pitch is selected the correction memory is era&ed. The typewriter
will begin to remember characters typed ofter on alternate pitch is selected [up
to a full line].
To correct a character rhat is on another line:
1. Position PRINT POINT INDICATOR to point to rhe incorrecr character .
2. Shallow-depress CORRECT Key (no machine response) and then type the
incorrect character .
3. Type the correct character .
Word Eraser™
This feature allows you to correct an entire WORD or WORDS on the current line
of type .
To remove one word fon current line) :
1. 13ockspace or space to
.9.Q}'. character in the word .
2. Depress the WordEraser'"KEYonce . The word is rhen corrected .
3. Type in the correct word.
To remove more than one word (on current line):
1. 13ockspace or space to any character in the right most word in the
series that needs correcting .
2. Depress the WordEroser'" KEY once for each word that needs correction.
The typewriter will correct the words from right to left.
3. Type in rhe correct words.
Note: If rhe PRINT POINT INDICATOR is between words and the WordEraser'"
KEY is depressed,the wmd(s) to the left of the space will be deleted .
ULOCATE PRINT POINT INDICATOP.
If the correction is on the SAME line . follow steps 1 through 3 under Character
Correction or WordEraser'" sections. Then to reposition the Print Point Indicator
at rhe location where you were before correcting the error ...
Depress the CODE KEY while simultaneously striking the Number Key ''3" .
11
To Next Page
Loading...
