AUTO UNDERSCORE (Depending on Model Purchased)
The Auto Underscore feature automatically underlines a word or several words
but not the spaces between or underlines dll words including rhe spaces. The
Number Keys
5 and 6 used in conjunction with the CODE KEY acrivore rhis fea-
ture. The CODE KEY plus the Number Key 7 deocrivores eirher Underline
Word or
Underline All.
To Acrivate AUTO UNDERSCORE-WORD(S) ONLY:
1. Depress and hold the CODE KEY while striking the Number Key "'5". The
beep indicates rhanhe Typewriter is now in the Auto Underscore WORD<S)
mode . Spaces ore not underlined .
2. Type .
.3. To Terminate Auto Underscore WORD(S), depress the CODE KEY while strik-
ing the Number Key
''7".
e To Activate AUTO UNDERSCORE-ALL:
1. Depress and hold the CODE KEY while striking the Number Key "6". The
beep indicates thotithe Typewriter is now in the Auto Underscore ALL
mode . All characters printed will be underlined including spaces.
2. Type .
.3.
To TERMINATE Auto Underscore ALL, depress and hold the CODE KEY while
depressing the Number Key
"7".
Note: When m. typewriter Is operating In this mode you may nffd to adjust
your typing speed to allow the typewriter to underline automofically.
TAD OPTIONS (Depending on Model Purchased)
The Number Keys "8, 9, and 0" when used in conjunction with the CODE Key,
allow you to do various rob typing procedures easily. These Features enable you
to center over tab stops automatically, to automatically oligm numbers by their
decimal points and to do flush right typing automatically Depressing the CODE
KEY with the Hyphen Key deoctaivotes any of these three functions. Activating
one tab option over anorher deactivates the first option.
TAD CENTER (Depending on Model Purchased) ·
This feature automatically centers typed text over o particular tab stop(s).
e To Activate TAB CENTER:
1. Set Tabs.
2. Depress rhe CODE KEY while striking the Number Key "8" . The beep con-
firms the typewriter is ready to center
.3. T<nb to desired location .
4. Type the text to be centered . The unit will backspace once for every two
characters typed.
A "chirp" will be heard for each character typed .
5. If an error is mode , simply tab again and retype text .
6. Depress the Carrier Return. The Text entered prints.
7. Repeat steps .3 through 6 for all other tab locations where centering is
needed .
8. To TERMINATE the Tab Center feature , depress the CODE KEY while striking
tli\e Hyphen Key.
DECIMAL TAD (Depending on Model Purchased)
This feature allows you to do statistical typing easily. All numbers ore automat -
ically aligned by their decimal points.
e To Activate DECIMAL TAB:
1. Set robs.
2. Depress the CODE KEY while striking the Number Key "9" .
.3. Tab to the desired location.
1.3
To Next Page
Loading...
