23
STAINLESS STEEL VENT
This product has been approved for use with stainless steel
using the manufacturers listed in Table 14.
Use only the materials, vent systems, and terminations listed in
Tables 14 and 16. DO NOT mix vent systems of different types or
manufacturers. Failure to comply could result in severe personal
injury, death, or substantial property damage.
The installer must use a specic vent starter adapter at the ue
collar connection, supplied by the vent manufacturer to adapt to
its vent system. See Table 16 for approved vent adapters. Do not
use CPVC starter piece.
Installations must comply with applicable national, state, and
local codes. Stainless steel vent systems must be listed as a UL-
1738 approved system for the United States.
Installation of a stainless steel vent system should adhere to
the stainless steel vent manufacturer’s installation instructions
supplied with the vent system.
Table 14. Stainless Steel Vent Pipe and Fittings
APPROVED STAINLESS STEEL VENT MANUFACTURERS
MAKE MODEL
Dura Vent (M & G Group)
FasNSeal Vent /
FasNSeal Flex* Vent
Z-Flex (Nova Flex Group) Z-Vent
Heat Fab (Selkirk
Corporation)
Saf-T Vent
Metal Fab Corr/Guard
Security Chimney Secure Seal
ICC VIC
*Use of FasNSeal Flex smooth inner wall vent is to be used in
vertical or near vertical sections only, taking precaution to ensure
no sagging occurs of the vent system. Connect to the FasNSeal
rigid vent using specially designed adapters and sealing method,
see manufacturer’s instructions.
Figure 21. Near Water Heater Stainless Steel Venting
Models 285 - 600
Table 15. Stainless Steel Sidewall Vent Termination Kit(s)
MODEL KIT NUMBER
700 - 800 100274668
Table 16. Approved Stainless Steel (S.S) Terminations and Adapters
MODEL PROTECH HEAT FAB Z FLEX
FASNSEAL SAF-T VENT Z-VENT
S.S Adapter
Flue
Termination
Intake Air
Termination
S.S.
Adapter
Flue
Termination
Intake Air
Termination
S.S.
Adapter
Flue
Termination
Intake Air
Termination
150 - 200
300715 FSBS3
FSRC3
303889 9301PVC 9392
5300CI
9314TERM 2SVSLA03 2SVSTP03
2SVSRCX03
2SVSTEX0390
400 - 600
F303759 FSBS4
FSRC4
FSAIH04
303888
9401PVC 9492
5400CI
9414TERM 2SVSLA04 2SVSTP04
2SVSRCX04
2SVSTEX0490
700 - 800
F303759
(Intake
Only)
FSBS6 FSAIH04
303888
9601MAD 9690
9692
9614TERM
METAL FAB SECURITY CHIMNEY ICC
Corr/Guard Secure Seal VIC
150 - 200
3CGPVCA 3CGSWHT
3CGSWC
3CGSW90LT -- -- -- -- -- --
400 - 600
4CGPVCA 4CGSWHT
4CGSWC
4CGSW90LT SS4PVCU SS4STU
SS4RCBU
SS4ST90AU -- -- --
700 - 800
6FCGPVCA 6FCGSWMC
6FCGSWC
6FCGSW90L SS6PVCU SS6STU
SS6RCBU
SS6ST90AU HE-6DSA-F HE-6MC-F
HE-6RC-F
HE-6E90-F
HE-6SCR-F
To Next Page
Loading...