Ensure therapy is paused
orthe pump is O
Remove the paper tape around
thecanister tubing and release tubing
to full length
Position the canister so thatthe
tubing is facing tothe rear of the pump
thenalign the pump over thecanister
Push down on the pump until you hear
a click from the release button
Remove the caps from both quick click
connectors and push them together
until they click.facing to the rear
of the pump then align the pump
over the canister
Start therapy by pressing
button
.
1
4
2
5
3
6
Installing a new canister
3 RENASYS
◊
EDGE Quick reference guide
To Next Page
Loading...
