7
• the product is used only with the transformer specified in the order.
• the serial number of the manual drive matches that of the SHZV type non-excitation tap switch
1.8 Inappropriate use
Use is considered to be inappropriate if the product is used other than as described in Chapter 1.7.
Shanghai Huaming Power Equipment Co., Ltd does not accept liability for damage from unauthorized or
inappropriate changes to the product. Unauthorized changes to the product without consultation with
Huaming can lead to personal injury, material damage and operational faults.
1.9 Personnel qualification
The product is designed solely for use in electrical or energy systems and facilities operated by
appropriately trained staff. This staff comprises people who are familiar with the installation, assembly,
commissioning and operation of such products.
1.10 Operator duty of care
To prevent accidents, faults and damage as well as unacceptable adverse effects on the environment,
those responsible for transport, installation, operation, maintenance and disposal of the product or parts
of the product must ensure the following:
• All warning and hazard notices are complied with.
• Personnel are instructed regularly in all relevant aspects of operational safety, the Operating Instructions
and particularly the safety instructions contained therein.
• Regulations and operating instructions for safe working as well as the relevant instructions for staff
procedures in the case of accidents and fires are kept on hand at all times and displayed in the workplace
where applicable.
• The product is only used in a sound operational condition and safety equipment in particular is checked
regularly for operational reliability.
• Use only replacement parts, lubricants and aids which are authorized by the manufacturer.
• Comply with the specified operating conditions and requirements of the installation location.
• All necessary devices and personal protective equipment for each activity are available.
• The prescribed maintenance intervals and the relevant regulations are complied with.
• Installation, electrical connection and commissioning of the product is only carried out by qualified and
trained personnel in accordance with this technical file.
• The operator must ensure appropriate use of the product.
To Next Page
Loading...
