• Inverter portable 30 amp plasma cutter.
• Either 110 volt of 230 volt input with automatic switching.
• Low input amperage requirement.
• Inverter technology allows the plasma cutter to be lightweight (29 Ib.) and still able to perform many
cutting applications.
• The adjustable amperage output of a minimum of 5 amps, allows the cutting of one layer of material
without cutting the second layer.
• The maximum of 25 amps will cut 3/8" steel and sever 1/2".
• Pilot self restart function allows the unit to cut perforated or grid metal.
• Low air pressure LED.
• Air regulator and filter.
• The PLASMA30i includes plasma cutter, torch assembly, ground cable, spare nozzle and electrode.
• Industry-leading technical support of over 30 years of experience by calling 800-ABC-WELD to
speak with a live expert.
To Next Page
