15
Chapter 3: PC Print Instructions
Print Sensor Information–
Connect to PC to print the last vehicle sensor data screen.
Printing sensor information such
as Sensor ID, Pressure, Temper-
ature and Battery condition is a
feature of the TPMS4. This func-
tion is performed after triggering
the vehicle sensors and connect-
ing the TPMS4 through the
WebTPM portal. In some cases,
printing sensor information
requires the most current soft-
ware version to be functional.
IMPORTANT:
This feature is only available after
the user has triggered the TPM
sensors in the vehicle, and the
tool has not been turned off.
1) Trigger TPM sensors with the
TPMS4.
2) Open up the TPMSconnect portal.
3) Connect USB cord to PC/Lap-
top and docking station.
4) In the TPMSconnect portal,
select "Print Sensor Information".
5) Sensor information is sent to
the printer.
Printing Result function will not
be available if the TPMSconnect
software driver is not installed.
To Next Page
Loading...
Need help?
General
