5
Introduction Features and Specifications
Technical Specifications
Built-in Stand
The built-in stand extends from the back of the Diagnostic Tool to allow hands-free viewing. The
stand clips into the Diagnostic Tool for storage and pivots out so the display is at a 35 degree angle
when in use.
Power Sources
Your Diagnostic Tool can receive power from any of the following sources:
• Internal Battery Pack
• AC/DC Power Supply
• Vehicle Power
• Docking Station
Item Description / Specification
Touch Screen
Resistive Touch Panel
Display
7 inch diagonal, LCD TFT
1024 x 600 resolution SWVGA, 16 bit color
Processor Intel Atom
Operating System
Microsoft Windows Embedded Standard SP3
Communications
802.11 b/g/n Wireless
Wireless Bluetooth
®
2.0 Technology
Battery
Lithium Ion Smart Battery Pack
Approximate 3.5 hour run time
Approximate 3 hour charge time (unit not operating)
Approximate 4 hour charge time (with unit operating)
Power Supply Supply Rating; 19 VDC, 3.24A
DC Operating Voltage
10 to 32VDC
Width
9.9 in. (252 mm)
Height
6.8 in. (173 mm)
Depth
1.8 in. (46 mm)
Weight (including
battery)
2.9 lb (1.32 kg)
Operating Temperature
Range (ambient)
At 0 to 90% relative humidity (non-condensing)
32 to 113°F (0 to 45°C)
Storage Temperature
(ambient)
At 0 to 70% relative humidity (non-condensing)
–4 to 140°F (–20 to 60°C)
Operating Altitude Maximum 2000 m
Environmental
Conditions
This product is intended for indoor use only
This product is rated for Pollution Degree 2 (normal conditions)
To Next Page
Loading...
