194
Maintenance Diagnostic Tool
Figure 17-2 Selecting a calibration option
– Automatic—uses 5 points on the screen to quickly bring the unit into calibration. You can
use your finger to calibrate the screen.
– Advanced—uses 9, 16, or 25 points on the screen to accurately bring the unit into
calibration. Use the dropdown menu to select the number of points, a stylus is required to
calibrate the screen.
4. Select and hold the center of each red box that displays in sequence.
Figure 17-3 Sample calibration target
5. Select OK to close the dialog boxes once the calibration is complete.
To Next Page
Loading...
