Snapmaker A150 - Page 12

6
|
Before You Start
1.4 Labels on Your Snapmaker
Safety Labels Hazard Warning Location
Hot surface
Sharp objects
Laser aperture
FDA
IEC 60825
IEC 60825
FDA
Laser radiation
Avoid contact with
hot surface.
On the 3D Printing
Module, Print Sheet
and Heated Bed
Take care to avoid injury
from sharp objects (e.g.
CNC Bits).
Laser radiation is emitted
from this aperture.
Class 4 laser product.
Avoid eyes and skin
exposure to direct or
scattered radiation.
On the Laser Module
On the CNC Module
On the Laser Module