Need help?Do you have a question about the Snapmaker 3-in-1 3D Printer and is the answer not in the manual?
Instructions for preparing the dual-purpose screwdriver for assembly and use.
Explanation of symbols used in the guide for caution, notice, and tips.
Attaching the four feet to the printer's base plate.
Connecting the heated bed to the Y-axis linear module.
Securing the Y-axis assembly to the printer's base plate.
Connecting the Z-axis assembly to the printer's base plate.
Mounting the X-axis assembly onto the main structure.
Using bubble level vials to ensure the printer's axes are correctly aligned.
Connecting the 3D printing module to the X-axis assembly.
Setting up the screen holder and inserting the touch screen for user interface.
Mounting the main controller unit onto the Z-axis assembly.
Installing the filament holder onto the Z-axis for filament management.
Connecting all modules to the controller and powering the machine on for the first time.
Detailed process for leveling the heated bed using the touch screen and paper guide.
Step-by-step guide for loading filament, including preparation and nozzle cleaning.
Instructions for software setup, G-code generation, and initiating prints via computer or microSD.
Information on accessing the user manual, FAQ, and Snapmaker community forums.
Contact details for general, technical, and sales inquiries with Snapmaker.
General| Filament Diameter | 1.75 mm |
|---|---|
| Software | Snapmaker Luban |
| 3-in-1 Functions | 3D Printing, Laser Engraving, CNC Carving |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Supported Filament Types | PLA, ABS |
| Connectivity | USB |
| Power Input | 100-240V AC |
| Nozzle Diameter | 0.4 mm |
| Layer Resolution | 0.05 - 0.3 mm |
To Next Page
