Need help?Do you have a question about the Snapmaker 2.0 and is the answer not in the manual?
Resolves common touchscreen issues like unresponsiveness, freezing, and display errors.
Addresses mechanical issues with linear modules, including noise, movement, and slider problems.
Guides on 3D printing module installation, detection, print adhesion, filament loading, and temperature.
Troubleshoots laser module auto-focus, power output, emission, and camera capture errors.
Covers Rotary Module usage with cuboid materials, chuck compatibility, and enclosure detection.
Resolves issues with the power module, Wi-Fi file transfer, USB drive recognition, and toolhead detection.
Guides on fixing Luban connection errors, missing camera buttons, and blank application interfaces.
Provides a visual and textual catalog of all parts included with the Snapmaker 2.0 system.
Details dimensions, materials, and performance metrics for Snapmaker 2.0 modules across models.
General| Model | Snapmaker 2.0 |
|---|---|
| Layer Resolution | 50 - 300 microns |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, Wi-Fi |
| Technology | FDM (Fused Deposition Modeling) |
| Frame Material | Aluminum Alloy |
| Extruder Type | Single |
| Heated Bed | Yes |
| Bed Leveling | Automatic |
| Modular Design | Yes |
| Build Volume | 320 x 350 x 330 mm |
| Touchscreen | Yes |
| Power Input | 100-240V AC |
| Supported Materials | PLA, ABS, TPU |
| Laser Power | 1600mW |
| CNC Spindle Speed | 6000 - 12000 RPM |
| Power Supply | 350W |
To Next Page
