42
|
Hardware
Compatibility with Third-party Chucks
The Rotary Module comes with a 3-jaw chuck. You can also use a compatible chuck of M14 thread size on the
market.
Here is a compatible 4-jaw chuck.
Using A350 Rotary Module on A250
The A350 Rotary Module can be used on the A250 machine. But if you have an A250 Enclosure, the A350 Rotary
Module cannot be placed inside an A250 Enclosure.
Snapmaker’s limited warranty does not apply to and therefore does not cover any defect or damage
caused by the use of third-party materials, accessories or software, etc. For more details, you can
refer to the warranty policy.
To Next Page
Loading...
