To Next PageTo Next Page
Need help?Do you have a question about the Snapmaker J1 and is the answer not in the manual?
Explains warning symbols and their meanings for safe operation.
Provides essential safety guidelines for using the product.
Specific safety precautions for 3D printing operations.
Details immediate actions to take in case of emergencies.
Lists technical data and specifications of the 3D printer.
Guides through the process of unboxing and initial setup.
Guides through initial setup via the touchscreen interface.
Covers language, user agreements, naming, and Wi-Fi connection.
Explains the layout and functions of the main touchscreen display.
Covers bed leveling, Z-axis, XY-axis offsets, and vibration compensation.
Outlines the complete process from preparation to printing.
Steps for preparing 3D models and generating G-code.
Methods for initiating a print via software or USB drive.
Guides for loading and unloading filaments.
Procedure for replacing the hot end on either extruder.
Common causes and solutions for prints not sticking to the bed.
Addresses issues with prints lifting or deforming at the edges.
Troubleshooting for issues where filament is not extruded or is thin.
General| Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Build Volume | 300 x 200 x 200 mm |
| Layer Resolution | 0.05-0.3 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 100°C |
| Connectivity | USB, Wi-Fi, Ethernet |
| Number of Extruders | 2 |
| Extruder Type | Direct Drive |
| Dual Extrusion | Yes |
| Nozzle Diameter | 0.4 mm (default) |
| Supported Materials | PLA, PETG, TPU |
| Touchscreen | 5-inch color touchscreen |
| Power Requirements | 100-240V AC, 50/60Hz |
