Security summary
This chapter provides important information about security. Read and follow the
guidelines carefully before starting to use the Snapmaker J1 3D printer.
Safety label
Be careful, there may be potential danger.
Do not touch the surface during printing or until it
has cooled completely after printing.
The PEI glass platform is fragile, so please handle
it carefully. To remove it, place it in a safe area.
Do not print directly on this surface or the heated
bed will be damaged.
Be careful of hot surfaces.
Do not touch hot surfaces with your hands during
printing or before they have cooled completely.
Be careful to press your hand.
When the moving parts of the machine move, do not
touch or block them with your hands to avoid
pinching.
To Next Page
Loading...
