Product introduction
Meet your Snapmaker J1 3D printer.
Function introduction
The Snapmaker J1 3D printer uses Fused Filament Fabrication (FFF) technology, is
equipped with high-speed Independent Dual Extruders (IDEX), has strong filament
compatibility, and uses industrial-grade drive technology to ensure superior print
quality. Its left and right extruders can work independently and at the same time,
helping you unlock more ways to play: when printing with two different materials, fine
structures such as hollowing can be achieved with the help of soluble/dissolvable
support materials; You can also print two identical or symmetrical models at once to
double the efficiency.
First of all, you need to prepare a 3D model for printing, which can be downloaded from
the model website or designed by yourself. Next, slice the model in the slicing software
and generate G-code, which tells Snapmaker J1 how to behave. Finally, the G-code is
transferred to the Snapmaker J1 and printing begins on the printer. Snapmaker J1 will
heat the molten material and extrude it onto the PEI glass platform and stack it layer
by layer to create a 3D object corresponding to the model.
Specifications
Print properties
Technology Fused Filament Fabrication (FFF)
extruder Independent Dual Extruders (IDEX)
Print mode
1.
Default mode
2.
Backup mode
3.
Copy mode
4.
Mirror mode
To Next Page
Loading...
