Need help?Do you have a question about the Snapmaker J1 and is the answer not in the manual?
General| Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Build Volume | 300 x 200 x 200 mm |
| Layer Resolution | 0.05-0.3 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 100°C |
| Connectivity | USB, Wi-Fi, Ethernet |
| Number of Extruders | 2 |
| Extruder Type | Direct Drive |
| Dual Extrusion | Yes |
| Nozzle Diameter | 0.4 mm (default) |
| Supported Materials | PLA, PETG, TPU |
| Touchscreen | 5-inch color touchscreen |
| Power Requirements | 100-240V AC, 50/60Hz |
To Next Page
