Need help?Do you have a question about the Snapmaker A250 and is the answer not in the manual?
Important safety guidelines, compliance information, and legal disclaimers for product use.
Details on product specifications, included parts, and video tutorials.
Steps for updating software, firmware, and preparing necessary tools.
Step-by-step instructions for attaching the Rotary Headstock to the machine base.
Procedure for securing the rotary base onto the CNC carving platform.
Wiring instructions to connect the Rotary Headstock to the machine controller.
Steps to assemble the CNC module and connect it to the controller.
Guide to using Snapmaker Luban to create G-code for CNC carving.
Instructions for initial machine setup and safety checks before starting CNC carving.
Guide to setting the work origin using the Origin Assistant feature.
Inputting the length and diameter of the material for CNC carving.
Procedure for securely clamping the material onto the 3-jaw chuck.
Instructions for selecting and attaching the Straight Groove V-bit.
Steps to define the work origin (X0, Y0) on the material for accurate carving.
Initiating the CNC carving process after preparation and checks.
Instructions for safely removing the carved material from the machine.
Steps to attach the Laser Module to the slider and connect it.
Guide to creating G-code for laser engraving using Snapmaker Luban.
Procedure for manually calibrating the focal length for laser engraving.
Initiating the laser engraving and cutting process.
Instructions for removing the finished workpiece after laser operations.
Step-by-step guide for correctly reinstalling the chuck jaws.
General| Build Volume | 230 x 250 x 235 mm |
|---|---|
| Print Technology | Fused Deposition Modeling (FDM) |
| Nozzle Diameter | 0.4 mm |
| Software | Snapmaker Luban |
| Frame Material | Aluminum alloy |
| Nozzle Temperature | Up to 275°C |
| Heated Bed Temperature | Up to 100 °C |
| Filament Diameter | 1.75 mm |
| Power Requirements | 100-240V AC, 50/60Hz |
| Layer Resolution | 0.05 - 0.3 mm |
| Filament Compatibility | PLA, ABS, PETG, TPU |
| Connectivity | USB, Wi-Fi |
| Machine Weight | 15 kg |
| Display | 5-inch Touchscreen |
To Next Page
