Snapmaker A250 - Laser Engraving and Cutting

38
4.1 Assemble the Laser Engraver
and Cutter
4.2 Generate the G-code File
4.3 Calibration
4.4 Start Engraving and Cutting
4.4.1 Preview the File
4.4.2 Select a Mode
4.4.3 Material Settings
4.4.4 Fix the Material
4.4.5 Set the Work Origin
4.4.6 Check Before Engraving and Cutting
4.5 Remove the Finished Work
Laser Engraving and Cutting