Need help?Do you have a question about the Snapmaker Artisan and is the answer not in the manual?
Covers general safety, 3D printing, laser, CNC, enclosure safety, and emergency measures.
Details machine specs and lists all included components for assembly.
Step-by-step guide to assemble the enclosure frame, panels, and door.
Instructions for installing the 3D printing platform and heated bed cable.
Guides for attaching the dual extrusion module and connecting its cable.
Guides for initial machine setup, connecting to Wi-Fi, and calibrating the module.
Instructions for generating G-code files and starting the first print job.
Details thickness measurement and camera calibration for the laser module.
Step-by-step guide on how to attach the correct CNC bit to the module.
General| Build Volume | 400 x 400 x 400 mm |
|---|---|
| Layer Resolution | 50 - 300 microns |
| Filament Diameter | 1.75 mm |
| Print Speed | Up to 180 mm/s |
| Frame Material | Aluminum Alloy |
| Bed Leveling | Automatic |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 120°C |
| Nozzle Diameter | 0.4 mm |
| Connectivity | Wi-Fi, USB |
| Supported Materials | PLA, ABS, PETG, TPU, Wood |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Power Requirements | AC 100-240V, 50/60Hz |
| Touchscreen | 7-inch Touchscreen |
To Next Page
