Snapmaker Artisan - Enclosure

Enclosure
3.1 Enclosure Assembly
3.1.1 Assemble the Bottom Frame
3.1.2 Assemble the Vertical Frame
3.1.3 Install Side Panels and the Top Panel Kit
3.1.4 Assemble the Enclosure Door
3.1.5 Combine the Enclosure and the Machine
3.1.6 Install the Back Panel and the Exhaust System
3.1.7 Plug, Lock, and Finish
3.2 Enclosure Settings
3.2.1 Enable/Disable Door Detection
3.2.2 Turn On/Off LED Strips and the Exhaust Fan