Snapmaker Artisan - Safety Labels on Your Snapmaker

8
https://snapmaker.com/
Do not print directly on this surface.
On the heated
bed
Label Warning Location
Avoid contact with hot surfaces.
Take care to avoid injury from sharp objects (e.g.,
CNC bits).
Take care to avoid crushing your hands.
On the Dual
Extrusion Module,
glass build plate,
and heated bed
On the 200W CNC
Module
On the Dual
Extrusion Module
Beware of potential hazards.
Avoid touching the object when printing or when
the object has not cooled down after a print.
On the glass
build plate and
heated bed
On the glass
build plate and
heated bed
Take care when handling fragile objects.
On the glass
build plate
1.4 Safety Labels on Your Snapmaker