EasyManua.ls Logo

Snapmaker Artisan - Page 13

Snapmaker Artisan
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-9
Before You Start
Label Warning Location
Do not plug or unplug the cable when
the machine is powered on.
Laser radiation is emitted from this
aperture. Do not touch the aperture,
and avoid eye and skin exposure to
direct or scattered radiation.
Class 4 laser product.
Avoid eye and skin exposure to direct
or scattered radiation.
Class 1 laser product.
Avoid eye and skin exposure to direct
or scattered radiation when the
interlocks are defeated.
On the heated
bed cable
On the 10W
Laser Module
On the 10W
Laser Module
On the Enclosure
Door
* The photographs in this guide take the safety label required in the EU region as an example.
* The same label on different locations may vary in color or texture.
Do not place objects that weigh more
than 7 kg on this surface.
On the top panel
of the Enclosure

Related product manuals