18 -19
Before You Start
1.10 About This Guide
This Quick Start Guide is intended to guide you through the assembly of Snapmaker Artisan and the first-time
operation of 3D printing, Laser engraving and cutting, and CNC carving and cutting with concise instructions
and graphics. The workflows of the three functions described in this guide are what we consider to be the most
convenient ones for you to get started quickly. For other workflows and more information about Snapmaker
Artisan, refer to our online User Manual: On the navigation bar of the Snapmaker official website, click Support
> Product Support > Snapmaker Artisan > User Manual.
You can also turn off the power switch first and then replace modules, remove or add addons.
You can also tap Settings > Module Assistant > Replace Module.
1.9.3 Firmware Update
You can update the firmware via Wi-Fi or a USB flash drive. When a new firmware version is available, the
machine will remind you to update when connected to a Wi-Fi network. We recommend that you always update
the firmware to the latest version.
Update via Wi-Fi:
1. Connect the machine to a Wi-Fi network;
2. On the Home Screen, tap Settings > Firmware Update;
3. If there is a new firmware version, click Download;
4. After the firmware download is finished, click Update.
Update via USB Flash Drive:
1. On the navigation bar of the Snapmaker official website, click Support > Product Support > Snapmaker
Artisan > Firmware. Then, download the latest firmware version and save it to your USB flash drive.
2. Insert the USB flash drive into the Integrated Controller;
3. On the Home Screen, tap Settings > Firmware Update > Local Update;
4. Select the newly downloaded firmware version and tap Update in the pop-up window.
To Next Page
Loading...
