Snapmaker Artisan - Important Safety Guidelines

2
https://snapmaker.com/
1.1 Disclaimer
Make sure that anyone who uses this product knows and understands the contents of the Quick Start Guide.
Failure to observe this guide may lead to personal injury, inferior results, or damage to the Snapmaker products
.
Snapmaker does not assume responsibility and expressly disclaims liability for any personal injury, inferior
results, or damage to the product arising out of or in connection with your improper operations or failure to
follow the instructions of the guide.
When using Snapmaker products, you should comply with the following requirements:
- Follow the instructions of this guide, the applicable laws and regulations, and the safety regulations in the
assembly, handling, storage, use, maintenance, or disposal of this product.
- Ensure there is no infringement on any third-party intellectual property rights or violation of any applicable
laws or regulations when making objects using this product.
The conditions or methods of using Snapmaker products are beyond the control of Snapmaker. For this
reason, Snapmaker does not assume responsibility and expressly disclaims liability for any consequences
resulting from:
- your improper methods, failure to follow the instructions of this guide or impacts of other uncertain factors
when operating this product;
- your infringement on any third-party intellectual property rights or violation of any applicable laws or
regulations when making objects using this product;
- personal injury, inferior results, or damage to the product arising out of or in connection with the assembly,
handling, storage, use, maintenance, or disposal of this product.
All the Snapmaker filaments and materials are compatible with this product and have been tested for safety.
If you use this product with third-party filaments or materials, Snapmaker does not assume responsibility
and expressly disclaims liability for any adverse effects from the use or performance of these filaments and
materials.
This manual is provided for reference purposes only. We do not warrant the absolute accuracy or completeness
of the information provided by this manual. No part of this guide may be reproduced, edited, or revised by any
means without the prior written permission of Snapmaker. We reserve the right to modify or revise this manual
in our sole discretion at any time without notice. You can download the most up-to-date version of this manual
at our Support Center (https://support.snapmaker.com/): select Snapmaker Artisan > Quick Start Guide.
1.2 Intended Use
Snapmaker modular 3D printers are intended for use under the guidelines provided in this guide. When making
objects using Snapmaker modular 3D printers, users remain responsible for qualifying and validating the
application of the created object for its intended use, especially for applications in strictly regulated areas like
medical devices and aeronautics.