Snapmaker Artisan - Page 11

6-7
Before You Start
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.1.1 (2019-03)
ETSI EN 301 489-17 V3.2.4 (2020-09)
RED Article 3.1(b), EMC (RED)
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 301 893 V2.1.1 (2017-05)
ETSI EN 300 440 V2.2.1 (2018-07)
RED Article 3.2, Radio (RED)
IEC 60825-1:2014 (Edition 3.0)
EN 60825-1:2014
IEC/EN 60825-1:2014, Safety of laser products-Part 1: Equipment
classification and requirements
RED Article 3.1(a), Safety (RED)
EN 62368-1:2020+A11:2020 RED Article 3.1(a), Safety (RED)
Council Directive 2006/42/EC, Annex I
Council Directive 2006/42/EC, Annex I Essential health and safety
requirements relating to the design and construction of machinery;
(MD)
EN 60204-1:2018
EN 60204-1:2018, Safety of machinery - Electrical equipment of
machines, Part 1: General requirements (MD)
ISO 13849-1:2015
ISO 13849-1:2015, Safety of machinery - Safety-related parts of
control systems - Part 1: General principles for design (MD)
EN ISO 12100:2010
EN ISO 12100:2010, Safety of machinery - General principles for
design - Risk assessment and risk reduction (MD)
Directive 2011/65/EU
A RoHS Directive 2011/65/EU and amendment directives (EU)
2015/863 on Lead, Cadmium, Mercury, Hexavalent Chromium, PBBs
& PBDEs, Phthalates(DBP, BBP, DEHP, DIBP) content (RoHS)
Directive 2012/19/EU WEEE Directive 2012/19/EU (WEEE)
(EC) No 1907/2006
European Chemicals Agency (ECHA) regarding Regulation (EC) No
1907/2006 and its amendment directives concerning the REACH.
(REACH)
The technical documentation is kept at the Manufacturer’s address.
Shenzhen Snapmaker Technologies Co., Ltd.
CHEN XUEDONG / CEO
Date of issue: 11/30/2022
Place of issue: SHENZHEN, CHINA