104 -105
3D Printing
4.3.2 Generate the G-code File
1. At the top-left corner of Workspace, click Back to return to the Home page. Then, click 3D Printing to enter
the 3D Printing G-code Generator.
2. Follow the Beginner's Guide to get familiar with the basic operations. During this process, Luban will
automatically load the test model and generate the G-code file.
3. After the G-code file is generated, click Export > Load G-code to Workspace at the bottom-right corner.
You can also click to import your own files and configure the parameters.
If the Beginner's Guide does not pop up or quits unexpectedly, you can click Help > Beginner's
Guide in the menu bar.
To Next Page
Loading...
