16
3.1 Assemble the CNC Carver
3.2 Generate the G-code File
3.3 Safety Instructions
3.4 Origin Assistant
3.4.1 Select an Assistant
3.4.2 Material Settings
3.4.3 Fix the Material
3.4.4 Attach the CNC Bit
3.4.5 Set the Work Origin
3.5 Start Carving
3.5.1 Preview the File
3.5.2 Run Boundary
3.5.3 Attach the Tailstock
3.5.4 Check Before Carving
3.6 Remove the Finished Work
CNC Carving
To Next Page
Loading...
