Molding size (length × width
× height)
Default mode, Backup mode:
300mm × 200mm × 200mm
Copy mode: 160mm × 200mm × 200mm
Mirror mode: 150mm × 200mm × 200mm
Print speed
10mm/s to 350mm/s
Acceleration
10000mm/s²
Layer height (when 0.4 mm
nozzle is used)
0.05mm to 0.3mm
Print platform PEI Glass Platform
Maximum temperature of heated
bed
100℃
Nozzle diameter Provided: 0.4mm
Purchase separately: 0.2mm,
0.4mm
(hardened steel), 0.6mm,
0.8mm
Maximum nozzle temperature
300℃
Filament diameter 1.75mm
Supporting filaments
PLA、ABS、HIPS、PC、TPU、TPE、PETG、ASA、PP、PVA、PA、
PA-GF、PA-CF
To Next Page
Loading...
