Safety instructions
General safety information
- The use of this product and the specific use should comply with the laws and regulations of
the user's location.
- This product is for indoor use only. Do not place this product in rain or moisture.
- Prepare a table or work surface that is stable and level for the use of this product.
- When operating this product, minors must be supervised and assisted by an adult.
- When operating this product, make sure that bystanders also read and understand the safety
instructions and keep bystanders at a safe distance.
- When operating this product, please keep concentrated attention and pay close attention to
the progress of work and the changes in the surrounding environment.
- It is strictly prohibited to operate this product in a state of fatigue or under the
influence of drugs, alcohol and drugs.
- When the product is in operation, do not touch the inside of the machine or any moving parts,
otherwise it may cause personal injury.
- When the product is turned on, please ensure that the machine is attended by a special person.
Shut down and stop using the product immediately if:
- You can smell the burning smell of the machine.
- You notice that the components inside the machine are damaged.
- The machine stops working unexpectedly;
- The machine makes unusual noises, lights, sparks, or anything else you notice about the
machine that has never been seen before.
3D Printing Safety Information
- Do not touch the nozzle, PEI glass platform and heated bed when the machine is printing or
heating.
- Be sure to turn off the machine and unplug the power cable before servicing the machine.
- Place the machine in a well-ventilated area. Some materials may release toxic and harmful
substances when they are melted.
To Next Page
Loading...
