Snapmaker software supports model files in STL, OBJ, 3MF formats, and
more formats to be added.
05
Prepare G-code files
Prepare the model file
Before generating the G-code file, you need to prepare the 3D
model file for printing. You can get the model file in the
following ways:
•
Use the models provided in the Snapmaker software's case library.
• Design 3D models using 3D modeling software such as SketchUp and Fusion 360.
•
Visit websites such as thingiverse. Com and myminifactory. Com to download free and
high-quality 3D models online.
• A 3D scanner is used to 3D scan models of various real objects.
Generate G-code files
To slice the model and generate a G-code file in the Snapmaker software, follow these
steps:
1.
Install the Snapmaker software and connect to Snapmaker J1.
2. Click the Import button on the left side of the interface To import the model.
3. Configure print parameters.
4. Click the Generate Print command to generate the G-code.
5. Depending on the printing method, choose to start printing directly on the Snapmaker
software or print via USB stick.
06
Start printing
Print on Snapmaker software
When Snapmaker J1 and the computer running the Snapmaker software are connected to the
same network, you can slice in the Snapmaker software and start printing directly.
To Next Page
Loading...
