Snapmaker J1 - PETG Filament Details

PETG
filament characteristics
Diameter
1.75mm
Density 1.25 G/cm ³ at 21 ˚ C
Melt index 10.8g/10 min
Glass transition temperature
81°C
Tensile strength
31.9 ± 1.1MPa
Flexural modulus
1174 ± 64MPa
Flexural strength
53.7 ± 2.4MPa
Elongation at break
6.8 ± 0.9%
Impact strength 5.1 ± 0.3KJ/㎡
Recommended printing parameters
39